TERMINATOR RIDE ON FLOOR SCRAPER TOOLING

REMOVE FLOORING EASILY WITH OUR WIDE RANGE OF TOOLING

This video shows how to select and install each type of tooling used on the Terminator Ride on Floor Scraper Series

The Terminator Ride on Floor Scraper has a variety of tooling options to help you remove most commercial & industry flooring quickly. All of the tooling shown below can be used on any Ride on Floor Scraper model as they use the same holders and attach the same.

Our tools have been developed to remove a variety of materials with ease, while also providing long life to reduce your tooling costs. With the available Floor Scraper tooling, you will be able to conquer any job.

WHAT TYPE OF MATERIAL ARE YOU REMOVING?

RESET FILTER (SEE ALL)

Tile Icon
TILE
Carpet-Icon
CARPET
Hardwood-Icon
HARDWOOD
VCT Linoleum - Icon
VCT | LINOLEUM | RUBBER FLOORING
Mortar-Icon
MORTAR | OVERLAYMENTS
Glue-Icon
ADHESIVES

TERMINATOR TOOLING

13'' JAW - BLADE HOLDER

13 Inch Jaw

The 13” Jaw is a very versatile jaw that accepts a variety of blade sizes up to 13″. Comes with both rigid and swivel mounting points for optimal flooring removal. It is used for the removal of Carpet, VCT & VAT, Sheet goods like rubber flooring, linoleum, polyurethane surfaces, and Removal of mastics

Glue-Mortar-Capret-VCT Icon

PART #

81-0027

DESCRIPTION

Terminator Swivel Head 13'' Jaw

26'' JAW - BLADE HOLDER

26-inch-Jaw

Very versatile jaw that accepts a variety of blade sizes up to 26″ wide and has the highest potential removal rate. Comes with the scoop that helps keep debris in front of the machine for better traction and faster clean up.

Equipped with both rigid and swivel mounting points for optimal flooring removal. It is used for the removal of Carpet, VCT & VAT, Sheet goods like rubber flooring, linoleum, polyurethane surfaces, and Removal of mastics

Carpet-VCT-Glue-Icon

PART #

81-0024

DESCRIPTION

Terminator Swivel Head 26'' Jaw

SELF DICING BLADES

Self-Dicing-Blades

When removing carpet, dicing blades help drastcially by cutting the carpet into strips as you remove the material. This lets the carpet come up easily and then roll into easy to clean up sections that make the process much quicker.

Carpet-Icon

PART #

DESCRIPTION

STANDARD

81-0071

81-0059

81-0053

4'' x 26'' x .074''

4'' x 13'' x .074''

4'' x 9'' x .074''

HEAVY

81-0074

81-0068

81-0062

81-0056

4'' x 26'' x .092''

4'' x 18'' x .092''

4'' x 13'' x .092''

4'' x 9'' x .092''

FLEX

Flex blades are used when you need more flexibility out of the blade so that it contours to the floor better. This is helpful when removing softer materials such as coatings or adhesives.

STANDARD

Standard Blades are the most common thickness of blade as they are very versatile. If you are removing different types of flooring often, these are a great all around blade to use on multiple materials.

HEAVY

Heavy blades are generally used when increased durability and rigidity is desired. When removing materials such as VCT and other tough soft materials, these blades will hold up.

SUPER-DUTY

Super Blades are used when extreme rigidity is required. They are the thickest blade offered for the Terminator Series.

NOTCHED BLADES

Notched Blades

Notch blades can be used to remove materials such as VCT, Linoleum, glue, and a variety of coatings and other soft materials. Notch blades gives you more rigidity as you scrape, which make them ideal for mainly VCT and Linoleum removal.

Glue-Mortar-Capret-VCT Icon

PART #

DESCRIPTION

STANDARD

81-0052

81-0058

81-0064

81-0070

4'' x 9'' x .074''

4'' x 13'' x .074''

4'' x 18'' x .074''

4'' x 26'' x .074''

HEAVY

81-0055

81-0061

81-0073

81-0081

4'' x 9'' x .092''

4'' x 13'' x .092''

4'' x 26'' x .092''

6'' x 26'' x .092''

SUPER-DUTY

81-0083

81-0085

81-0087

4.5'' x 10'' x .125''

4.5'' x 13'' x .125''

4.5'' x 26'' x .125''

FLEX

Flex blades are used when you need more flexibility out of the blade so that it contours to the floor better. This is helpful when removing softer materials such as coatings or adhesives.

STANDARD

Standard Blades are the most common thickness of blade as they are very versatile. If you are removing different types of flooring often, these are a great all around blade to use on multiple materials.

HEAVY

Heavy blades are generally used when increased durability and rigidity is desired. When removing materials such as VCT and other tough soft materials, these blades will hold up.

SUPER-DUTY

Super Blades are used when extreme rigidity is required. They are the thickest blade offered for the Terminator Series.

NO NOTCHED BLADES

No Notched Blades

No Notched Blades also are used to remove VCT, Linoleum, glue, and a variety of coatings and other soft materials. The No Notched design gives the blade more flexibility in the holder, helping you to remove softer materials like glue, adhesives and other soft coatings as the blade will contour to the curves of the slab better.

Carpet-VCT-Glue-Icon

PART #

DESCRIPTION

FLEX

81-0044

81-0045

81-0046

81-0047

3'' x 10'' x .062''

3'' x 13'' x .062''

3'' x 18'' x .062''

3'' x 26'' x .062''

STANDARD

81-0051

81-0057

81-0063

81-0069

4'' x 9'' x .074''

4'' x 13'' x .074''

4'' x 18'' x .074''

4'' x 26'' x .074''

HEAVY

81-0054

81-0060

81-0066

81-0072

81-0081

4'' x 9'' x .092''

4'' x 13'' x .092''

4'' x 18'' x .092''

4'' x 26'' x .092''

6'' x 26'' x .092''

SUPER-DUTY

81-0082

81-0084

81-0086

4.5'' x 10'' x .125''

4.5'' x 13'' x .125''

4.5'' x 26'' x .125''

FLEX

Flex blades are used when you need more flexibility out of the blade so that it contours to the floor better. This is helpful when removing softer materials such as coatings or adhesives.

STANDARD

Standard Blades are the most common thickness of blade as they are very versatile. If you are removing different types of flooring often, these are a great all around blade to use on multiple materials.

HEAVY

Heavy blades are generally used when increased durability and rigidity is desired. When removing materials such as VCT and other tough soft materials, these blades will hold up.

SUPER-DUTY

Super Blades are used when extreme rigidity is required. They are the thickest blade offered for the Terminator Series.

TILE TOOTH HOLDER

Tile-Tooth-Holde

The Tile Tooth Holder is used for holding both the Ceramic Tile tooth and Milled Tile tooth. These tools are generally used for Ceramic, quarry, stone tile, Wood flooring, Mortar & overlayments.

Tile Hardwood

PART #

81-0031

DESCRIPTION

Tile Tooth Holder

STANDARD TILE TOOTH

Ceramic Tile Tooth

The Standard Tile Tooth is great for removing tile and other tough materials. It is a cost-effective and very aggressive tile removal.

Tile Hardwood

PART #

83-0002

DESCRIPTION

Standard Tile Tooth

MILLED TILE TOOTH

Milled-Tile-Tooth

The Milled Tile tooth is used for removing materials such as Ceramic tile and other tough materials that require a lot of focused force. This tool is milled to have a very aggressive point, helping remove material easier. The main difference between the Ceramic and Milled tile teeth is the aggressiveness. Because the Milled tooth is thinner, it will get under materials easier.

Tile Hardwood

PART #

83-0001

DESCRIPTION

Milled Tile Tooth

CHISEL BIT HOLDER

Chisel Bit Holder

The Chisel Bit Holder is used for holding the 3 types of chisel tools that are available. These tools are generally used for removing hardwood flooring.

Hardwood Icon

PART #

53-0336

DESCRIPTION

HEX SHANK TOOL HOLDER

CHISEL BITS

Chisel Bits

Chisel bits are generally used for removing hardwood flooring. There are 3 different styles that can be used depending on the specific type of flooring and how tough it is to remove.

Hardwood Icon

PART #

81-0355

81-0356

81-0361

DESCRIPTION

Hex Shank, 20'' Flat Chisel

Hex Shank , Digging Chisel

Hex Shank , 3'' Wide Chisel

SABER CLAW HOLDER

SabreClaw-Holder

The Saber Claw tooling can be used for a variety of applications. Comes with both a “hard mount” & “ articulating” mounting points. If you need a more aggressive removal tool This is our most aggressive tooling for the most difficult removals, all tool holders are built very heavy duty for long life.

Tile-Mortar-Hardwood Icon

PART #

81-0333

81-0334

DESCRIPTION

Sabre Claw Holder (2'' & 4'')

Sabre Claw Holder (6'')

SABER CLAW TOOLS

SabreClaw-Tool

The Sabre Claw Carbide Tools comes in 2”, 4” or 6” versions to accommodate the type of job that you are working on. These tools are used to remove materials such as Ceramic, quarry, stone tile, Wood flooring, Mortar & overlayments.

Tile-Mortar-Hardwood Icon

PART #

83-0014

83-0015

83-0016

DESCRIPTION

2'' Sabre Claw Bit

4'' Sabre Claw Bit

6'' Sabre Claw Bit

NEED MORE HELP?

CONTACT US FOR JOB SUPPORT & ANY OTHER QUESTIONS